Product Center_WANSHANG ELECTRIC POWER EQUIPMENT CO.,LTD.

KYN28-24 armored removable AC metal-enclosed switchgear

KYN28-24 armored removable AC metal-enclosed switchgear (hereinafter referred to as "switchgear"), suitable for three-phase AC 50Hz power system, used to receive and distribute electric energy and control, protect and monitor circuits. This product complies with the standards: GB3906-2006 "3.6-40.5kW AC metal-enclosed switchgear and control equipment", GB/T11022 "Common technical requirements for high-voltage switchgear and control equipment standards", IEC62271:200 "Rated voltage above kV and below 52" AC metal-enclosed switchgear and control equipment", DL/T404 "Technical Conditions for Ordering Indoor AC High Voltage Switchgear".

KYN28-12 armored removable AC metal-enclosed switchgear

KYN28-12 armored removable AC metal-enclosed switchgear is suitable for 3.6-12kV three-phase AC 50Hz power grid, which is used to receive and distribute electric energy, and to control, monitor and protect the circuit. Can be used for single busbar, single busbar section system or double busbar system. The switchgear conforms to IEC298 "Rated voltage kW above 52kW and below AC metal-enclosed switchgear and control equipment", IEC694 "High-voltage switch and control equipment common terms", my country's GB3906 "3-35kV AC metal-enclosed switchgear" and DIA04 "Indoor Ordering Conditions for AC High Voltage Switchgear", Germany DN.VDE0670 "AC Switchgear with Rated Voltage Above kV" and other standards. And has a perfect and reliable anti-misoperation function.

KYN61-40.5 armored removable AC metal-enclosed switchgear

KYN61-40.5 armored removable AC metal-enclosed switchgear (hereinafter referred to as switchgear) is a complete set of indoor power distribution devices with three-phase AC volume of 50Hz and rated voltage of 40.5kV. As power plants, substations and industrial and mining enterprises to receive and distribute electrical energy, it can control, protect and monitor circuits, and can also be used in places where frequent operations are performed. The switchgear conforms to GB3906-2006, GB/T11022-2011 and DL/T404-2007 standards.

Mine general low-voltage switchgear

This switchgear is suitable for the power supply system of the mine central control room, underground parking lot, and main ventilation passage electromechanical chamber in coal mines without gas, dust explosion and other similar mines. It is a 380V~1140V system Power, power distribution, lighting, motors and other electrical equipment receive, feed, control and protect and power conversion equipment, the switchgear is also suitable for ground substations and power supply systems in metallurgy, chemical industry, electric power and other departments.

JP outdoor integrated distribution box

JP outdoor integrated distribution box is an outdoor integrated distribution device that integrates metering, outgoing, reactive power compensation, etc. , Installed on the pole of the transformer on the household supplementary column, a new generation of ideal power distribution products for urban and rural power grid transformation.

JXF integrated distribution box

JXF integrated distribution box is suitable for three-phase three-wire, three-phase four-wire, three-phase five-wire system with 50Hz, 500V and below, load current not more than 250A, for control of power distribution system, leakage protection and motor overload, short circuit, Phase loss protection and various controls. The box has reasonable design, small size, beautiful appearance, safe and reliable use, and is widely used in metallurgy, petrochemical, medical and health, aviation, residential quarters, shopping malls, schools, and urban renovation.